Without the charger, you wouldn't be able to finish your regular tasks because the charger is the laptop's oxygen source. You can also visit the Toshiba repair center to get more information. However, the charger or the laptop's charging capabilities could stop working due to an accident or carelessness.

Let's look at the parts that generate issues before we begin troubleshooting:

• list itemUsers experience problems when the router and adapter do not use the same sort of security. You can also visit Toshiba Service Center To get more about it

• list itemYour device won't be able to connect to the internet if the driver version is outdated.

• list itemThe adapter is occasionally unable to connect to the network due to the IPv6 network protocol.

• list itemIf your Wi-Fi adapter is incompatible with the Windows version you are using, you may be having USB problems.

• list itemYour device may be hampered by third-party security software if it is unable to connect to the internet.

A unique LED embedded in the charger will either light up or make a beeping sound as soon as you attach it to your laptop. If that doesn't happen, there could be a number of reasons why the laptop doesn't charge even after being connected. Here are a few examples:

It's probable that a damaged charger adapter cord is the cause of the laptop's insufficient power supply. You can also visit the the Toshiba Repair Center to get more information regarding this.

The charger and the battery are both outdated.
a problem with the computer's power source; an out-of-date battery driver.

Scan emails to:

Your document should be placed on the glass or in the document feeder.
From the drop-down menu, choose "Scan."
Put your department code in the number pad and hit the "Enter" key.
Press the [Scan to Email] button on the touchscreen.
Press the "E-Mail Address" button on the touch screen.
Enter the email address, and then press the key. Use the number pad for numbers.

Press "Start" to begin the document's scan. Click "Job Finish" once all of the pages have been scanned. It will automatically send an email to the specified address.

Toshiba e-studio 3511 Network Administrator's Manual: Setup Flow For Scan To Email
The fourth phase entails setting up the destination.

Configuring Remotes 1 and 2 for Scan to Email The Scan to Email function allows users to send scanned photos to email addresses via the Internet. When the scan-to-email environment is set up, the equipment uploads the document to the Internet and sends an email to the SMTP server.

To transfer the Scan to Email document over the Internet, the SMTP server needs a DNS server. Apart from that, if you have any problems regarding Toshiba products, you don’t need to worry. You can visit the Toshiba Service Center USA. It will provide you with all the facilities regarding this.

Setup procedure

Step 1: Configure the DNS and SMTP servers, if necessary.

Step 2: Use these instructions to turn on HTTP and TCP/IP network services. The SMTP Network Service34 configuration is the

Step 3: To set up the location, users can choose to save scanned data only to local or network folders, depending on their preferences. "Preparing the Location" (p.76). You should either define which network directories users can store scanned data in if you want them to be able to.

At Step 4: they can either choose which network directories they wish to save them to or save them to themselves. Configuring Remotes 1 and 2 on page 76

Step 5: When this equipment uses the SMTP server to send an email, you must configure the DNS server and SMTP server in your network. Access "Configuring DNS and Mail Servers," page 185.
Set the TCP/IP and HTTP Network Services from the Touch Panel display the first time you use it to make TopAccess accessible. Read the User Functions Guide before configuring the TCP/IP and HTTP Network Services using TopAccess or the Touch Panel Display. P.53 On page 58, under "Configuring TCP/IP," is "Configuring the HTTP Network Service." You should specify the SMTP server to use when sending an email. Configuring the SMTP Client, page 59

Email Scanner for Toshiba

Enter your copier's IP address into any web browser to access TopAccess. Click Login in the top right corner of the website from here and enter your information.

Select the "Network" Sub-Tab next, then the "Administration" tab.
Choose SMTP Client from the list.
Choose "SMTP Client" from the drop-down menu at this point.
You can configure your SMTP Client Settings here.
You may need to adjust your SMTP Client settings according to your email provider.
The choices listed below are utilized for Gmail.
Please be aware that in order for this to function if you use Gmail, you must enable Access for Less Secure Applications.
Once your options have been entered, click "OK" and then "Save" at the top of the list page.
After that, choose the "Email" Sub-Tab.
You must again enter both your email address and the From Name.
Use the Default Body string to indicate to the recipient that they shouldn't respond or that the communication is automated.
From the drop-down option, choose "Save."
Send it to anyone in your contact list by selecting the copier's Scan -> To Email option, or manually entering an email address.

When everything is set up, you may sign in to the printer and choose the Scan or Scan/Fax option.

Follow the instructions below to set up scan to email so that users can scan and send emails to the Microsoft 365 or Office 365 mailboxes of your business. As stated in the Microsoft manual, the steps follow Option 2: How to configure a multipurpose device or program to send emails using Office 365 or Microsoft 365.

Sign in to the Microsoft 365 admin center in a new browser tab.
Choosing Show all from the navigation menu will.
After choosing Settings, choose Domains.
Choose your domain from the DNS records tab.
Note the POINTS TO ADDRESS value for the MX record. In step 9, you must add the MX record.
Enter the web page for the printer and log in as the administrator.
From the main menu, choose Network.
Select Email TX under Email Settings (SMTP):
the page for email TX (SMTP)
Select Please ensure that the hostname is entered in the SMTP Server Address field.

The port number should remain set at 25.
Select "Start TLS" under Use SSL/TLS.
Set the value of Port No. (SSL) to 465 or 587.
Select OFF in POP before SMTP.
Uncheck SMTP Authentication if it is selected.
Apart from that, you shouldn't be concerned if you have any issues with Toshiba products. The Konica Minolta Repair Service Center USA is accessible. You will have access to all the facilities in this regard.

Email sender and the Me button
There is a Me button on the Konica Minolta Email function. To scan this for yourself, select it. Your email address is automatically prefilled in the To and From fields because you are signed in with Printix.

If the email sender (from the field) does not have a certain value, some SMTP servers will refuse to send the scanned documents. As a workaround, you can specify the email sender in the Go setup. The "Me" button, however, will not function as intended because the "To" field will also be set to this email address. In this scenario, your options are to either choose the recipient from the printer's address book or type their email address into the printer's control panel.

The following is another potential workaround to make the "Me" button functional:
Enter the web page for the printer and log in as the administrator.
From the main menu, and then choose Security.
Choose to restrict user access.
Select "Allow" under "Registering and updating addresses."
To prevent the "From" address from changing and to utilize the administrator's address, choose Admin. E-mail Address under "Changing the "from" address."