Complete list of Konica Minolta printer errors and their fixes

[alinabell090]

Welcome to our collection of Konica Minolta printer errors, which is a subset of our list of printer error codes. Because the naming scheme tends to be very brand-specific, we have chosen to share error codes, along with their answers, based on the printer brand to make life easier for our readers.

Before we begin troubleshooting the error codes on your printer

Error codes are intended to identify any issues, no matter how big or small, that may be occurring inside a printer. Printers from Konica Minolta are not an exception to this rule. These are some of the most common Konica Minolta Center problems that you could run into when using one. The Ctrl+F key combination is the best way to locate the mistake you are seeking to fix. Good fortune!

It is obvious that the majority of this terminology is too complex for the majority of us to understand, but you can help yourself by looking at the official Konica Minolta User Manual that corresponds to your specific model.

Solution for Konica Minolta Error Code 0094
The IDC sensor's inability to detect shutter level or retraction failure is the cause of code 0094; this problem is most frequently encountered with printers in the BizHub C35 series.

The M2-PRCB PJ6 connector and the M2 connection, which ensure that the drive is coupled in accordance with its design, must first be checked in order to fix the 0094 error. The connector between IDC-PRCB and PJ24 is also crucial in the process of fixing this problem.

If the 0094 problem still persists, you might need to test the SD2, M2, and IDC sensors' functionality. If neither of these is operating correctly, both the PRCB and these modules need to be changed.

Solution for Konica Minolta Error Code 107
One of the following possibilities could be the cause of code 107, often known as the "scan to email error code 107":

The printer cannot log in or connect to the shared folder.
The firewall settings don't allow the SMB port to be opened
The shared folder doesn't exist.

Since this is frequently the cause of the printer's inability to connect to the shared folder, it is required to allow the TCP 445 port in your computer's firewall to fix code 107. Try to enable File and Printer Sharing functionality in your Windows settings if the port has been opened. While you're doing it, verify that the shared folder is configured properly by examining its access privileges and determining whether they meet the needs of your use case.
The shared folder's name should be checked, and any special characters, spaces, etc. should be removed if the scan to email error code 107 cannot be fixed. To avoid problems with using the folder in the future, limit the name to normal letters and digits.

Solution for Konica Minolta Error Code 535
When attempting to scan to email from a printer in the BizHub C368 series, the code 535, commonly known as the scan error, is frequently caused by an SMTP server issue or an authentication error.

Check to see if your firm recently changed email passwords, since this is a regular practice to maintain a certain level of security in order to fix the scan error code 535. The Konica Minolta printer's setup email must be updated if the password for the email address has changed. The issue should be fixed after the printer's internal e-mail address has been updated with the new password.

It is best to factory reset the printer and create a new configuration account if code 535 cannot be fixed. We advise using a "hidden" user who has a permanent email address and password to reduce the likelihood that this issue may occur in certain scenarios.

Solution for Konica Minolta Error Code C0202
The power surge for the paper tray lift motor, which is providing the signal to trigger the error, indicates that the cause of this error code is jammed paper.

Pull the printer's power cord to fix the problem, and then empty the paper tray by removing it as well. Given that the paper tray lift motor is probably nearby, this should give you a good idea of what might be the problem. If any paper gets wedged between the rollers and the guides, carefully remove it. Make sure everything fits tightly together by putting all of the parts you removed back where they belong. Start the printer and look to see whether the issue occurs.

If the problem still persists, remove the paper tray once more and inspect the tray limit sensor's condition for obstruction or a weak connection. Check all surrounding connectors as well, if there are any. You will need to change a few of those connectors, most likely the M12-PRCB CN25 or the connector between the PS25 I/O, if everything appears to be connected properly. For additional information on how to do this extensive repair, see the official Konica Minolta User Manual.

Solution for Konica Minolta Error Code C2204
The failure of the waste toner transport motor is what caused this error code. The toner lock sensor, to which this component is closely related, posts this error when it is trapped in either the blocked or the unblocked position for a predetermined period of time.

You must unplug the power cable from the wall socket and turn the machine off to fix the problem. Being familiar with parts like the heater lamp fuse, roller thermostat, and interlock switches is essential because one of them is probably to blame for the issue. If there are no subsystem errors, the heater lamp fuse must be turned on simultaneously with the power switch to start the heating process. If it doesn't, a replacement is required. In situations where the mistake reappears, you may be certain that the roller thermostat or the interlock switches are to blame. If your printer is experiencing this, it is best

Solution for Konica Minolta Error Code C2152
This error code is caused by a problem with the transfer belt's ability to retract, in that it either does not retract at all or retracts past the endpoint. It's typical to see the general maintenance" sign on the screen along with the error code.

It is important to remove the transfer belt unit from its housing in order to fix the problem. Take care not to hit the sensor plates on either side while you do this. Take note if any ink has been spilled in this region; if so, the retractor is probably not functioning as it should. Reinstall everything after properly cleaning it all with cotton pads and rubbing alcohol, paying special attention to the sensor plates. Turn off the printer and wait at least 20 seconds before attempting to reset the code. Next, depress the power switch while holding down the printer's utility button. When you approve the Troubleshooting Reset notification that appears on the screen, the fault should be fixed.

Solution for Konica Minolta Error Code C0500
The heating element anomaly is the cause of this error code. The heating components in every Konica Minolta printer are there to get the device to the right temperature for printing. The machine will display the C0500 fault code in this situation because the roller's surface temperature cannot rise to the necessary level.

It is required to come close to the waste toner box in order to remedy the problem. Most likely, there is hardened toner material on the bottom that has made its way to the transport motor's gears and is overloading them. The good news is that only the gears need to be replaced, and a certified Konica Minolta technician is best suited to perform this.

The controller board may be damaged if the problem cannot be fixed by taking out and cleaning the waste toner box and the transport motor gears. In this situation, it might be worthwhile to consider having the printer serviced by a professional, although in general, this is one of the most expensive fixes.