Regenerative Slab Continuous Heating Furnace
-
The reasonable selection of the furnace bottom strength of the regenerative heating furnace is closely related to the furnace length, actual heating capacity, heating quality, and furnace operating conditions (combustion load, furnace pressure, maintenance cycle, furnace body life, etc.). However, there is no detailed information on the calculation of the bottom strength of the regenerative heating furnace. Through the selection and calculation of the furnace bottom strength in the medium-plate regenerative heating furnace project of a steel plant, it is ensured that the use effect is basically consistent with the actual capacity of the furnace.[link text](
link url)https://www.vacfurnace.com/technology-frontiers/classification-and-selection-of-vacuum-carburizing-process/(1) The selection of the furnace bottom strength of the regenerative slab continuous heating furnace. When the billet is a room temperature billet and the thickness of the raw material is 150-300mm, it should be based on the heat penetration time of the billet. The furnace bottom strength is generally 600-700kg ( m2.h) is more suitable.[link text](
link url)https://www.vacfurnace.com/technology-frontiers/vacuum-pressureless-sintering-of-boron-carbide-ceramics-with-additives/